Cambridge Patents

Header information

Main Content area

Page Content

Pictures we need icon

Representations for Community Designs

Community Design Registrations are very good value for money. If you wish to file an application we can prepare the necessary representations for you. However, if you prefer to do this yourself, the requirements are set out below.

1. The representation of the design shall consist in a graphic or photographic reproduction of the design, either in black and white or in colour.

It shall meet the following requirements:

(a) save where the application is filed by electronic means pursuant to Article 67, the representation must be filed on separate sheets of paper or reproduced on the page provided for that purpose in the form made available by the Office pursuant to Article 68;

(b) in the case of separate sheets of paper, the design shall be reproduced on opaque white paper and either pasted or printed directly on it. Only one copy shall be filed and the sheets of paper shall not be folded or stapled;

(c) the size of the separate sheet shall be DIN A4 size (29,7 cm x 21 cm) and the space used for the reproduction shall be no larger than 26,2 cm x 17 cm. A margin of at least 2,5 cm shall be left on the left-hand side; at the top of each sheet of paper the number of views shall be indicated pursuant to paragraph 2 and, in the case of a multiple application, the consecutive number of the design; no explanatory text, wording or symbols, other than the indication 'top' or the name or address of the applicant, may be displayed thereon;

(d) where the application is filed by electronic means, the graphic or photographic reproduction of the designs shall be in a data format determined by the President of the Office; the manner of identifying the different designs contained in a multiple application, or the different views, shall be determined by the President of the Office;

(e) the design shall be reproduced on a neutral background and shall not be retouched with ink or correcting fluid. It shall be of a quality permitting all the details of the matter for which protection is sought to be clearly distinguished and permitting it to be reduced or enlarged to a size no greater than 8 cm by 16 cm per view for entry in the Register of Community Designs provided for in Article 72 of Regulation (EC) No 6/2002, hereinafter 'the Register', and for direct publishing in the Community Designs Bulletin referred to in Article 73 of that Regulation.

2. The representation may contain no more than seven different views of the design. Any one graphic or photographic reproduction may contain only one view. The applicant shall number each view using arable numerals. The number shall consist of separate numerals separated by a point, the numeral to the left of the point indicating the number of the design, that to the right indicating the number of the view.

In cases where more than seven views are provided, the Office may disregard for registration and publication any of the extra views. The Office shall take the views in the consecutive order in which the views are numbered by the applicant.

3. Where an application concerns a design that consists in a repeating surface pattern, the representation of the design shall show the complete pattern and a sufficient portion of the repeating surface. The size limits set out in paragraph l(c) shall apply.

4. Where an application concerns a design consisting in a typographic typeface, the representation of the design shall consist in a string of all the letters of the alphabet, in both upper and lower case, and of all the arabic numerals, together with a text of five lines produced using that typeface, both letters and numerals being in the size pitch 16.